EK-Quantum Kinetic FLT 360 D5 PWM D-RGB – Plexi
Kinetic FLT er flöt útgáfa af dælu/forðabúri og passar á allar 120mm viftu festingar. 6x G1/4 port gefa marga möguleika með mismunandi uppsetningu á lögnum ásamt því að hafa D5 dælu þá öflugustu á markaðinum. Innbyggður LED ljósaborði með svartri álplötu sem tryggir að heitir blettir eru sem fæstir frá lýsingu.
46.990 kr.
Þessi vara er sérpöntun. Hafðu samband fyrir áætlaðan afhendingartíma. | Áætlaður komutími: Ekki skráð
Technical specifications:
– Size (HxWxT): 365x120x86mm (with the mounting system)
– Capacity: ~435ml
– D-RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground)
Pump electrical and mechanical properties:
– Motor: Electronically commuted spherical motor
– Rated voltage: 12V DC
– Power consumption: 23W
– Maximum pressure head: 3.9m
– Maximum flow: 1500L/h
– Maximum system temperature: 60°C
– Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
– Power connector: SATA power and 4-Pin PWM FAN connector
Operational regime:
– PWM duty cycle: ~ 20-100%
– Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present
Enclosed:
– EK-Quantum Kinetic FLT 360 PWM D5 D-RGB
– Mounting mechanism with all necessary screws for 120mm fan mounting
– Pair of EK reservoir holders with mounting screws
– 4 × G1/4 Plugs
– 1 × Allen key for reservoir holders
Made in Slovenia – EU!
Pump motor made in Hungary – EU!
PLEASE NOTE:
- Do not clean the reservoir with alcohol derivates or other solvents as the acrylic may crack!
- Coolant and additional plugs are just for showcase and are not delivered with the product!
- The D5 pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry.
Additional Info
Threads | G1/4 |
---|