EK-Quantum Kinetic FLT 240 D5 PWM D-RGB – Plexi

Kinetic FLT 240 er flöt útgáfa af dælu/forðabúri og passar á allar 120mm viftu festingar.  6x G1/4 port gefa marga möguleika með mismunandi uppsetningu á lögnum ásamt því að hafa D5 dælu þá öflugustu á markaðinum.  Innbyggður LED ljósaborði með svartri álplötu sem tryggir að heitir blettir eru sem fæstir frá lýsingu.

39.990 kr.

Þessi vara er sérpöntun. Hafðu samband fyrir áætlaðan afhendingartíma. | Áætlaður komutími: Ekki skráð

Smelltu hér fyrir ítarlegri upplýsingar um þessa vöru

Technical specifications:

– Size (HxWxT): 245x120x86mm (with the mounting system)
– Capacity: ~265ml
– D-RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground)

Pump electrical and mechanical properties:
– Motor: Electronically commuted spherical motor
– Rated voltage: 12V DC
– Power consumption: 23W
– Maximum pressure head: 3.9m
– Maximum flow: 1500L/h
– Maximum system temperature: 60°C
– Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
– Power connector:  4-Pin Molex- and 4-Pin PWM FAN connector

Operational regime:

– PWM duty cycle: ~ 20-100%
– Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present

Enclosed:

– EK-Quantum Kinetic FLT 240 PWM D5 D-RGB
– Mounting mechanism with all necessary screws for 120mm fan mounting
– Pair of EK reservoir holders with mounting screws
– 4 × G1/4 Plugs
– 1 × Allen key for reservoir holders

Made in Slovenia – EU!

Pump motor made in Hungary – EU!

PLEASE NOTE:

  • Do not clean the reservoir with alcohol derivates or other solvents as the acrylic may crack!
  • Coolant and additional plugs are just for showcase and are not delivered with the product!
  • The D5 pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry.

Additional Info

ThreadsG1/4
Shopping Cart